Wiring Rules Updates Effective 1st January 2019
The new Wiring Rules AS/NZS 3000:2018 Electrical installations known as the Wiring Rules was published in June 2018. The rewrite of the standard was based on:
- (a) new technology, new equipment and improved installation techniques;
- (b) industry feedback regarding readability and compliance;
- (c) identification and clarification of normative (mandatory) requirements and informative guidance material throughout the document; and
- (d) experience gained in the application of the previous edition as expressed to Standards Australia and Standards New Zealand.
The new Wiring Rules (AS/NZS 3000: 2018) will be mandated in Victoria on the 1st January 2019, industry needs to be aware of the major changes that will affect how they complete electrical installation work.
Energy Safe Victoria’s expectation is that everyone working in the electrical installation industry has purchased a copy, read the standard and will comply with all requirements as of 1st January 2019.
Although there are a large amount of changes to the standard, the key areas are as follows:
Contents, a new comprehensive contents section down to 3 levels assisting a reader to easily find the information they are looking for.
Section 1, Clause 1.9.3 Alterations & Repairs.
Section 2, Clause 188.8.131.52 Origin of submains and final subcircuits, Clause 184.108.40.206 Protection against switchboard internal arcing fault currents, Clause 2.6.3 Residual Current Devices which is separated into Australia and New Zealand requirements respectively, Clause 2.10.2, Switchboard Accessibility and emergency exit facilities.
Section 3, Clause 3.8.2 Sleeving requirements for existing Earthing and bonding conductors and Sleeving requirements for existing Live conductors, Clause 3.9.4 Protection against mechanical damage.
Section 4, Clause 4.1.3 External influences (figure 4.1 & 4.2), Clause 220.127.116.11 Recessed luminaires, Clause 4.7.3 Clearance from open cooking surfaces (Figure 4.17), Clause 18.104.22.168 Water heaters-Isolating switch, Clause 4.19 Air-conditioning and Heat pump systems and Clause 4.20 Lifts.
Section 5, Clause 22.214.171.124 Earthing of outbuildings (figure 5.4 & 5.5), Clause 126.96.36.199 Swimming Pools and Spas.
Section 6, Clause 188.8.131.52 Electricity generation systems, Clause 184.108.40.206 Electricity generation systems, Clause 220.127.116.11 Electricity distributor’s electrical equipment, Figure 6.8 Enclosed shower with hinged door and Figure 6.5 & 6.6 shower with fixed plumbing connection in ceiling.
Section 7, Clause 7.2 Safety Services – totally restructured and additional requirements, Clause 18.104.22.168 General, Clause 22.214.171.124 Alternative supplies and Clause 7.8.2 Standards containing additional requirements.
Section 8, minor changes to structure of clauses, requirements remain the same and the addition of 6 new appendices for further guidance and information.
This article was originally featured in our quarterly Middy's MAG #24 Dec ‘18 - Feb ‘19 Edition. Read Latest Issue